$485.00
Our buffalo head is handmade with reclaimed metal. We hand draw the head pattern on the metal with soapstone and cut it with a hand held plasma cutter. The shapes are then arc welded together to form the head. We hand hammer the eyes on and mount the head on a recycled corn planter disk.
The metal is sealed with a water-based enamel. This piece can be hung inside or out. Each head will have subtle variations. They are cut by hand and each piece of metal has slight color differences.
This head can easily be hung with a nail or screw. The weight is approximately 15 lbs
Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.
Size: 18″h x 21″w x 12″d
Out of stock
Additional information
Weight | 15 lbs |
---|---|
Dimensions | 18 × 21 × 12 in |
Sculpture Type | Wall Sculpture |
Add a Review
Be the first to review “Buffalo Head” Cancel reply
Blaze the Bull
ArchivedWe created this bull head sculpture from reclaimed metal. The head is painted with red milk paint. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and arc weld it into shape. The head is mounted on a recycled corn planter disk.
Each head will have subtle variations. We cut them by hand and each piece of metal has slight color differences. The metal is sealed with a water-based enamel. This head can easily be hung with a nail or screw. It's weight is approximately 15 lbs Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 17”h x 26”w x 7”dDrag Chain Side Table
ArchivedModern lines blend with a rich agricultural history in this statement end table. The metal is from the drag chain from a Dion Silage Wagon. We cut and shaped a piece of recycled steel into place. Then applied a clear coating to the entire table for a shiny finish.
It can be used as side table or end table to keep your reading material beneath or is even great for holding drinks on the patio. Each table will have unique variations. Care: Wipe clean with a damp cloth. Size: 22”h x 20”w x 20”dElk Head
Sculpture, Wall Sculpture, WholesaleWhen art with strength and a bit of whimsy is called for, this faux taxidermy wall mount is a trophy winner. The Elk Head is a statement-maker in your foyer, entryway or hung above your indoor or outdoor fireplace mantle. It is a candidate for a special husband gift or fathers day gift.
We created this Elk head sculpture with reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. The antlers start out as flat pieces of rusty metal. We hand hammer them into shape and grind them smooth. Finally we mount the head on a recycled corn planter disk.
The metal is sealed with a water-based enamel. This piece can be hung inside or out. Each head will have subtle variations. We cut them by hand and each piece of metal has slight color differences.
This head can easily be hung with a nail or screw. It?s weight is approximately 15 lbs
Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.
Size: 26''h x 16''w x 13''d
Deer Woods Map
ArchivedTo create this wall sculpture, we were inspired by map symbols and state flowers and animals. The metal we used is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The blue was hand painted with milk paint.
The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 22"h x 22"w x 7"d
Reviews(0)
There are no reviews yet.